Health & Safety in the Construction Sector

Compliance Management, ISO Standards

Construction is one of the most highly regulated industries and health and safety is of paramount importance due to the nature and severity of the risks involved of the field. The construction sector has about four times the average rate of fatal accidents. Each year, the sector sees approximately 3% of its workers sustain a work-related injury and approximately another 3% suffer from an illness that is believed to be work-related, leading to a total of 1.7 million working days lost per year. In 2015, 35 workers and 4 members of the public were killed as a result of accidents related to construction work. Unsafe environments can result in employees and the public being put in harm’s way, criminal proceedings being brought against the company and reputational damage for a company. Putting an effective health and safety management system in place to minimise these risks is critical.

The British Standard OHSAS 18001 health & safety management standard (due to be replaced with ISO 45001) is an internationally recognised standard. Knowledge of and compliance with applicable legislation and regulations are some of the main requirements of this standard. For a company or individual found in breach of legislation it can be highly expensive. The UK Health and Safety Executive achieved a conviction rate of 93%, with an average fine per case of £25,000 last year.

In 2015 they:

  • prosecuted 650 cases, with at least one conviction achieved in 606 of those cases, a conviction rate of 93%;
  • prosecuted 1,058 offences, resulting in 905 convictions, a conviction rate of 86%;
  • handed out fines totalling £16.5 million, an average penalty of £18,198 per offence.

 

safety-in-the-construction-sector

Common Causes of Injury in the Construction Sector

Asbestos

Although asbestos was banned for use in most developed countries in 2000, it may still be found in many existing structures. Renovations, maintenance and development on brownfield sites can expose construction workers to this hazard. Inhalation of asbestos fibres can cause serious lung diseases. There is no safe level of exposure, and every incident of exposure has the potential to cause disease. A very complicated set of legal requirements exist for dealing with asbestos, such as the Control of Substances Hazardous to Health Regulations 2002 (COSHH), Control of Asbestos Regulations 2012 (CAR) and Construction (Design and Management) Regulations 2015 (CDM) to name but a few applicable pieces of legislation in the UK.

Hand-arm vibration

Hand-arm vibration syndrome is another danger associated with construction work. The extended use of power tools can cause permanent damage to the hands and arms, making them incurably numb. Any attempts to work with this condition results in pain and loss of dexterity and grip strength for those affected. Fortunately, it is easily preventable. Power tools should be rotated through several workers, so no one worker uses it for more than the recommended amount of time. There is some legislation in the area of hand-arm vibration syndrome, such as Chapter 2 of Part 5 and Schedule 6 of the Safety, Health and Welfare at Work Regulations 2007 which relates to exposure to physical agents at work and sets out the requirements relating to the control of vibration at work in Ireland. In the UK, the Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013 (RIDDOR) requires employers to report and keep records of work-related deaths, serious injuries, diagnosed cases of certain industrial diseases and near-miss incidents. While the Control of Vibration at Work Regulations 2005 are intended to protect people from both hand-arm vibration and whole-body vibrations arising from work activities. These regulations place duty on employers to ensure health risks arising from exposure to vibration are assessed thoroughly which are then either eliminated or reduced.

Injuries are avoided by proper compliance with health and safety laws and regulations. A legal register service, such as the Pegasus Legal Register is vital to do this effectively and implementing a health & safety standard such as OHSAS 18001 or ISO 45001 (when it is published) could also be a worthwhile exercise. They provide organisations with a good system for identifying and evaluating compliance with legislation relating to health and safety.

Sources

Tags
Asbestos , Construction , Hand-arm Vibration , Health & Safety , Health & Safety in Construction , ISO 45001 , Management System , OHSAS 18001
Related Posts
Ergonomics – Importance in the Workplace and Employer’s Responsibilities Legislation Update Ireland: New Ionising Radiation Regulations 2019 Revised Code of Practice for Access and Working Scaffolds Improving Worker Consultation & Participation – ISO 45001:2018 The Safety, Health & Welfare at Work (Chemical Agents) Regulations 2001: Changes & Impacts Practical Ways of Demonstrating Top Management Involvement in ISO 45001 for OH&S Management System The Safety, Health and Welfare at Work (Electromagnetic Fields) Regulations ISO 45001:2018 – Clause 10: Improvement ISO 45001:2018 – Clause 9.3: Management Review ISO 45001:2018 – Clause 9.2: Internal Audit
Request a Demo  
Request a Demo

See Pegasus in action

The best way to understand what Pegasus can do for you, is to see it in action. Request a demo and one of our consultants will set-up a quick online tailored demo to run through the relevant aspects of the service.
  • This form collects your details above so we can contact you back in relation to your enquiry. Please see our privacy policy for more information.